Quectel M10 Hardware Description page 15

M10 Hardware Design
GPRS connectivity
Temperature range
DATA GPRS:
CSD:
SMS
FAX
SIM interface
Antenna interface
Audio features
Serial port and Debug port
Phonebook management
SIM Application Toolkit
Real time clock
Alarm function
Physical characteristics
M10_HD_V1.00
Class 1 (1W) at DCS 1800 and PCS 1900
GPRS multi-slot class 12 （default）
GPRS multi-slot class 10 (option)
GPRS multi-slot class 8 (option)
GPRS mobile station class B
Normal operation: -35°C ~ +80°C
Restricted operation: -45°C ~ -35°C and +80°C ~ +85°C ○
Storage temperature: -45°C ~ +90°C
GPRS data downlink transfer: max. 85.6 kbps
GPRS data uplink transfer: max. 85.6 kbps
Coding scheme: CS-1, CS-2, CS-3 and CS-4
Supports the protocols PAP (Password Authentication Protocol)
usually used for PPP connections.
Integrates the TCP/IP protocol.
Support Packet Switched Broadcast Control Channel (PBCCH)
CSD transmission rates: 2.4, 4.8, 9.6, 14.4 kbps,
non-transparent
Unstructured Supplementary Services Data (USSD) support
MT, MO, CB, Text and PDU mode
SMS storage: SIM card
Group 3 Class 1
Support SIM card: 1.8V, 3V
Connected via 50 Ohm antenna pad
Speech codec modes:
Half Rate (ETS 06.20)
Full Rate (ETS 06.10)
Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)
Adaptive multi rate (AMR)
Echo Cancellation
Echo Suppression
Noise Reduction
Serial Port: Seven lines on Serial Port Interface
Serial Port can be used for CSD FAX, GPRS service and send
AT command of controlling module.
Serial Port can use multiplexing function.
Autobauding supports baud rate from 4800 bps to 115200bps.
Debug Port: Two lines on Serial Port Interface /TXD and /RXD
Debug Port only used for debugging
Support phonebook types: SM, FD, LD, RC, ON, MC.
Support SAT class 3, GSM 11.14 Release 99
Implemented
Programmable via AT command
Size:
1
- 14 -