ABB SM2000 User Manual page 32

Advanced Videographic Recorder
SM2000
Setup Security
Not Enabled
Fig. 3.2 Accessing the Setup Level – Advanced Security
Note. If an incorrect password is entered the display returns to the Operating view. However, if the maximum number of
consecutive incorrect password entries is exceeded, the user's access privileges are removed and the following message is
displayed:
If this occurs, access privileges can be reinstated only by the system administrator (User 1). If the system administrator's access
privileges have been removed, the security system must be disabled using the configuration security switch (Yellow switch) to
gain access to the configuration – see Section 4.1.3, page 45.
30
Note. Do not use sharp objects such as screwdrivers, pen
nibs etc. to operate the touch screen.
Note. The Setup level can be
accessed from any operator screen.
Setup
Security
Enabled
Enter Password
(see Section 3.3, page 31)
3 SETUP
Invalid Password
Entered
(see Note Below)
Valid Password
Entered
IM/SM2000 Issue 11