Arkon GN083 Installation Instructions

GN083 | Lighter Socket Pedestal for Garmin GPS
Compatible with Garmin®:
• Nüvi™ - 200, 200w, 250, 250w, 260, 260w, 270, 300, 310, 350, 360, 370, 600,
610, 650, 660, 670, 680, 710, 750, 760, 770, 780, 850, and 880 models
• StreetPilot™ - c310, c510, c530, c550, and c580 models
Installation Instructions
Step 1. Insert the lighter socket plug (A) completely into the vehicle's
lighter socket. Rotate the tightening ring to secure the pedestal.
Step 2. Adjust the angle of the pedestal bending the fl exible gooseneck
to the desired placement angle.
Step 3. Carefully attach your cradle to the head by inserting the ball (B)
into the Garmin cradle (C) cavity (not included, sold separately).
Adjust the angle and of the head by loosening / tightening the
wing nut (D).
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
GN083
Lighter Socket
Pedestal
Package Contents:
(1) GN083 - Lighter Socket Pedestal for Garmin Nüvi™ and StreetPilot™
No Tools Required for installation.
Do not install this pedestal in an airbag deployment zone.
!
Garmin brand name and Nüvi and StreetPilot product names are
trademarks or registered trademarks of Garmin International.
Arkon Resources, Inc. is not affi liated with Garmin International.
(A) Lighter Socket
Plug
(B) Ball head
(D) Adjustment
Wing nut
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
(C) Garmin
Cradle
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan
© Copyright 2008 Arkon Resources, Inc.