Table of Contents
Advertisement
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not
be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance
or use of this material. This product is only to be used for
its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in the
user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Regulatory Information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC)
on page 2 .
•
Radio and Telecommunications Terminal Equipment
(R & TTE) Directive 1999/5/EC. See Radio Transmission
on page 2 .
•
Low Voltage (LVD) Directive 2006/95/EC. See Safety
on page 3 .
•
Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and Recycling on page 3 .
A copy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
Information on page 3 .
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed according to
the instructions and used in its intended environment.
•
Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used
in its intended environment.
This product fulfills the requirements for immunity
according to EN 61000-6-2 industrial environments.
This product fulfills the requirements for emission
according to EN 61000-6-3 residential, commercial and
light-industrial environments.
Radio Transmission
This equipment may generate or use radio frequency energy.
The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
USA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesirable operation.
This product complies with FCC radiation exposure limits
for an uncontrolled environment. Avoid operating this
product at a distance less than 20 cm (7.9 in) from the user.
Canada
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This product complies with IC radiation exposure limits for
an uncontrolled environment. Avoid operating this product
at a distance less than 20 cm (7.9 in) from the user.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes
: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Ce produit est conforme aux limites d'exposition aux
radiations IC pour un environnement non contrôlé.
Évitez d'utiliser ce produit à une distance inférieure à
20 cm (7,9 po) de l'utilisateur.
Europe
Hereby, Axis Communications AB declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
FR
Par la présente Axis Communications AB déclare que
l'appareil ce produit est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la directive
1999/5/CE.
DE
Hiermit erklärt Axis Communications AB, dass sich dieses
Produkt in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten Vorschriften
der Richtlinie 1999/5/EG befindet.
IT
Con la presente Axis Communications AB dichiara che
questo prodotto è conforme ai requisiti essenziali ed
alle altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
ES
Por medio de la presente Axis Communications AB declara
que el este producto cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles
de la Directiva 1999/5/CE.
FI
Axis Communications AB vakuuttaa täten että tämä
tuote tyyppinen laite on direktiivin 1999/5/EY oleellisten
Advertisement
Table of Contents
