Page 2
EN 61000-6-3 residential, commercial and Every care has been taken in the preparation of this light-industrial environments. document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot Radio Transmission be held responsible for any technical or typographical errors This equipment may generate or use radio frequency energy.
Search by product, category, or phrase Axis Communications AB declara que este produto está • report problems to Axis support staff by logging in to conforme com os requisitos essenciais e outras disposições your private support area da Directiva 1999/5/CE.
Page 4
TICE TICE • The Axis product shall be used in compliance with local laws and regulations. • Store the Axis product in a dry and ventilated environment. • Avoid exposing the Axis product to shocks or heavy pressure. • Do not install the product on unstable brackets, surfaces or walls.
AXIS A4011-E Reader Installation Guide This Installation Guide provides instructions for connecting AXIS A4011-E Reader to a network door controller. AXIS A4011-E Reader is an OSDP reader that is designed to communicate with Axis network door controllers. Installation Steps 1. Make sure the package contents, tools and other materials necessary for the installation are in order.
Tampering alarm switch indicators Power & Data connector Frontplate screw (T20) Reader Feedback The table below shows the feedback signals that are preconfigured in the reader when connected to an Axis network door controller. LED indicator Beeper pattern Event/state Door locked Silent...
IEC/EN 60950-1, IEC/EN 60950-22 EN 50581 (RoHS) IEC/EN 60529 IP54 Dimensions (HxWxD) 157 x 56 x 22 mm (6.18 x 2.17 x 0.87 in) Weight 270 g (0.6 lb) Warranty Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty...
• The recommended maximum cable length is 30 m (98.4 ft). • To use the reader with AXIS A1001, connect the RS485 wires from A to B and from B to A. For more information about Axis network door controller connections, see the hardware pin chart, generated through the door controller’s hardware configuration, and the User...
AXIS A4011-E Reader Wire Area NO TICE TICE TICE Each wire shall have an area that corresponds to an conductor gauge range of AWG 28–16 (CSA) or AWG 22–14 (cUL/UL). Select cables in compliance with your local regulations. Area mm Diameter mm (in) 28–16...
4. Make sure that the silicone gaskets are positioned correctly. 5. Hook the frontplate onto the tabs on the backplate and push the front panel into place. 6. Tighten the screw. Further Information Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and guides.