SoftBank 002P User Manual page 56

Hide thumbs Also See for 002P:
Table of Contents

Advertisement

Appendix
Cannot charge battery
Is AC Charger (sold separately) firmly connected to handset or Desktop Holder
(not included)? (ZP.XX-XX)
Is AC Charger securely plugged into an outlet?
Is battery installed in handset correctly? (ZP.XX-XX)
Is handset correctly mounted in Desktop Holder?
Make sure handset, battery, Desktop Holder and AC Charging terminals are
clean.
Is ambient temperature between +5°C and +35°C?
Otherwise, battery may not reach full charge.
When charging battery during a call/data transmission, Notification Light/
Charging Indicator may go out due to handset temperature increase. When
handset temperature returns to normal level, Notification Light/Charging
Indicator illuminates again.
Battery may need to be replaced.
Handset/accessories feel warm
AC Charger/Desktop Holder may warm during charging.
Handset may warm during long use. This is normal if you can hold it
comfortably. Low temperature burns may occur if handset is held against skin
for long periods.
Battery Operating Time is greatly reduced
Battery Operating Time may be reduced by environmental factors such as
temperature, charging conditions or signal strength, as well as by operations or
settings. See "Charging Time & Operating Time Estimates" (ZP.XX-XX) and
"Battery Time" (ZP.XX-XX).
Warning Signs
Problem
Handset is out-of-range.
appears
Move to a location where signal is strong.
Keyguard is active (ZP.XX-XX).
appears
Cancel Keyguard to use keys. Answer calls even if
Keyguard is active.
Low battery
Battery is low.
message appears
Charge (ZP.XX-XX) or replace battery (ZP.XX-XX).
and battery alarm
tone sounds
9-4
Causes and Remedies

Advertisement

Table of Contents
loading

Table of Contents