Save Function; Log Clear - Extech Instruments GRT350 User Manual

Save Function
The meter permits saving measurements in up to 200 memory locations.
When a test has completed, press the SAVE button to store the measured data.
The display will show the location number of the saved data. "SAVE ###"
LOG Display
1. Press the ON/OFF button and wait for the "Select Function" screen to appear.
2. Press the "►" button and select "LOG Display".
3. Press the "TEST/STOP" button. The log number will display on the screen.
4. Press the "►" or "◄" arrow button to scroll through the saved data.
5. Press ESC to get back to the "Select Function" display.
LOG Clear
1. Press the ON/OFF button and wait for the "Select Function" screen to appear.
2. Press the "►" button and select "LOG Clear"
3. Press the "TEST/STOP" button. "Are you sure?" will display on the screen.
4. Press the "TEST/STOP" button to clear the log data. "Successful!" will display on the
screen.
5. Press the "TEST/STOP" button to verify that the data log is clear. "No Log data" will
display on the screen.
6. Press ESC to get back to the "Select Function" display.
800.561.8187
8
www. .com
GRT350‐en‐GB_v1.3 12/16
information@itm.com