Philips HL5211 Instructions Manual page 10

ENGLISH
10
Tips
- Stale bread toasts more quickly than fresh bread.Therefore, set the
toast setting dial to a lower setting.
- When toasting 2 slices of bread, it is recommended that the slices
are of equal size and freshness.
- If you wish to reheat toast that has not been buttered, set the toast
setting dial to the first toast setting, no 1.
- When toasting a single slice of bread, the inner side of the bread will
be toasted a little bit more than the outer side, this is normal for
toasters that toast side by side, as some of the heat from the unused
toasting slot will be transferred to the inner side of the used slot.
- When toasting 2 slices in the 4-slice toaster, use both slots and place
the bread in the middle of the slots and reduce the toasting setting.
- Never place an object on top of the toaster when in use, this will
cause damage to the toaster.
Cleaning
After use and before cleaning, set toast setting dial to (0) OFF. Remove
the plug from the outlet and allow toaster to cool down.
Wipe the outside with a damp cloth and dry with another cloth or
paper towel. Do not use scouring or abrasive cleaners on any part of
the toaster.
To avoid damage to the toaster heating elements, do not use any metal
utensils to clean the inside of the toaster.
Crumbs will accumulate in the crumbtray and could catch fire if the
tray is not emptied frequently.When the toaster has cooled down
completely, tap the sides of the toaster lightly to dislodge any crumbs
caught in the toasting chamber and pull out the crumbtray. Empty the
tray, wipe clean and replace the tray into the toaster.