Splits And Layers - Kurzweil SP6 Getting Started Manual

GETTING STARTED GUIDE
SP6 Sounds

Splits and Layers

Splits and Layers
The Split and Layer function can be used to Split or Layer the current Program or Multi.
Different keyboard regions can play different Programs, or multiple Programs can be played
from the same region. To Split or Layer a Multi, it must contain at least one Zone which is
unused (Off).
In Program or Multi Mode, press the PREVIOUS and NEXT buttons simultaneously to view
the Split/Layer page. You will then be able to configure up to three additional Programs to
create a Split or Layered Multi containing up to four Programs.
Press the SAVE button once to view the Save Dialog. The Save Dialog allows you to choose an
ID number and name for the Split/Layer Multi you are saving. Use the CHANNEL/PAGE
buttons to switch between ID selection and naming pages. On the Multi Save page, press the
SAVE button again to save the Split/Layer Multi.
After saving the Split or Layer as a Multi, additional Multi Controller and FX settings can be
edited in Multi Edit Mode.
13