Table of Contents
Advertisement
Overview
he RMX-KB104 keyboard drawer series features a rack mount drawer designed for a low-profile
104-key keyboard, a storage compartment, and a mouse pad. The series is available with or
without the integrated 104-key keyboard with numeric keypad and Windows keys. The drawer
comes in either a grey finish (as shown on manual cover) or a black finish to match our Omnix
chassis. Additional colors are available by special order. See page 1 - 3 for logo and key lock
placement.
The keyboard drawer is firmly mounted in a simple bracket offering the slide mounted
capabilities for standard RETMA 19" equipment cabinets. The
keyboard drawer requires only 1.75" (1U) of rack space - the minimum amount available for a
rack mounted device. A key lock is included for added security.
When the keyboard drawer is extended (approximately 11"), it will latch into place by use of the
keylock on the front panel. To slide the keyboard back into the rack, press and hold the tabs on
the outside of the rails to unlock it and then slide it back into the rack.
The RMX-KB104 keyboard drawer comes in four models:
RMX-KB104 – Drawer, keyboard, mouse pad, slide assembly, grey finish with logo
on left and key lock on right
RMX-BKB104 – Drawer, keyboard, mouse pad, slide assembly, black finish with
logo on right and key lock on left
RMX-KB104/DRWR – Drawer, mouse pad, slide assembly, grey finish with logo on
left and key lock on right
RMX-BKB104/DRWR – Drawer, mouse pad, slide assembly, black finish with logo on
right and key lock on left
RMX-KB104 User's Guide
Overview
1-3
Advertisement
Table of Contents
