Johnson Matrix Retail R30 Service Manual page 27

4.5 SIDE COVERS REPLACEMENT---CONTINUE
3) Remove the top cover by loosening and removing the four screws. (Figure D and E)
4) Remove crank arm (see section 4.4)
5) Remove the crank by loosening and removing the four screw. (Figure F and G)
5) Remove the side cover by removing the 7 screws on both the left and right side covers. (Figure H and I)
6) Reverse the steps to install new covers.
CHAPTER 4: Part Replacement Guide
FIGURE D
FIGURE F
FIGURE H
FIGURE E
FIGURE G
FIGURE I
27