Wavecom TnT ELB G4-Series User Manual page 14

Wavecom Instruments Portable Appliance Testers Instruction Manual

Press the

Press the
Result hold time
Press Enter and F2 to enable options then F2 until you get to result hold time this allows you to change the time
that the results values are showed on the TnT display screen

Press the

Press the
KILL SWITCH
To stop operation press the return/enter key at any time. The unit will power down after 20
seconds as factory default.
Caution: This test turns the Equipment ON. The power / leakage test can handle up to 10 Amp (Resistive) Load
MAX. Exceeding this value will blow the external M205 ceramic fuse. Care should be taken when testing inductive
loads (i.e. AC motors) with large start up currents.
If 10A HBC fuse is blown the appliance will not operate in Power test or Leakage test modes. Replace fuse only
with M20 10A HBC fuses. Any other fuse voids warranty and manufacturers design.
Caution: DO NOT OPEN
Warranty
key to disable.
key to enable.
key to increase time.
key to decrease time.
TnT – Series case as there are no serviceable parts inside and you can void your
14