M+Fx5-4Da_Waveoutputreqsetting - Mitsubishi Electric MELSEC iQ-F FX5 Reference

3.4

M+FX5-4DA_WaveOutputReqSetting

Name
M+FX5-4DA_WaveOutputReqSetting
Overview
Item Description
Overview Specifies whether to start, stop, or pause the wave output of a specified channel or all channels.
Symbol
(1)
(2)
(3)
(4)
(5)
Labels
■Input label
No. Variable name Name
(1) i_bEN Execution command
(2) i_stModule Module label
(3) i_uCH Target channel
(4) i_uStartStopReq Waveform output
start/stop request
(5) i_uUnitType Module type
■Output label
No. Variable name Name
(6) o_bENO Execution status
(7) o_bOK Normal completion
(8) o_uWaveStatusCH1 CH1 Wave pattern
output state monitor
(9) o_uWaveStatusCH2 CH2 Wave pattern
output state monitor
(10) o_uWaveStatusCH3 CH3 Wave pattern
output state monitor
(11) o_uWaveStatusCH4 CH4 Wave pattern
output state monitor
M+FX5-4DA_WaveOutputReqSetting
B : i_bEN
DUT : i_stModule
UW : i_uCH o_uWaveStatusCH1
UW : i_uStartStopReq o_uWaveStatusCH2
UW : i_uUnitType o_uWaveStatusCH3
o_uWaveStatusCH4
Data type
Bit
Structure
Word [Unsigned]
Word [Unsigned]
Word [Unsigned]
Data type
Bit
Bit
Word [Unsigned]
Word [Unsigned]
Word [Unsigned]
Word [Unsigned]
o_bENO : B (6)
o_bOK : B (7)
: UW (8)
: UW (9)
: UW (10)
: UW (11)
o_bErr : B (12)
o_uErrId : UW (13)
Range Description
ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
The setting range Specifies the module label for the analog output
differs depending on module.
the module label.
1 to 4, 15 • 1 to 4: The corresponding channel number is
specified.
• 15: All channels are specified.
0: Waveform output Specifies a start or stop request for the wave output.
stop request
1: Waveform output
start request
2: Waveform output
pause request
0: FX5-4DA Specifies a module type.
Default value Description
OFF ON: The execution command is ON.
OFF: The execution command is OFF.
OFF The on state indicates that the execution of the FB is
normal.
0 Outputs the value of the wave output status (stopped,
output, or paused).
0: Waveform output stopped
0
1: Waveform output
2: Waveform output paused
0
3: Waveform output step execution
The FB is not capable of executing the wave output
step action function.
0
To execute the function, use the device/buffer memory
batch monitor of GX Works3.
For details, refer to MELSEC iQ-F FX5 User's
Manual (Analog Control - Intelligent function module).
3 ANALOG OUTPUT MODULE FB
3.4 M+FX5-4DA_WaveOutputReqSetting
3
19