Antenna Connection - DAEWOO ELECTRONICS DLN-15D3SHS Instruction Manual

Connections
TO CABLE TV (CATV)
Incoming cable
• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the
75-ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.
• Some cable TV companies offer "premium pay channels". Since the signals of these premium
pay channels are likely to be scrambled, a cable TV converter/descrambler is generally
provided to the subscriber by the cable TV company. This converter/descrambler is
necessary to watch scrambled channels normally. (Set your TV to channel 3 or 4 as one of
them is generally used. If the channel is unknown, consult your cable TV company.) For more
specific instructions on installing cable TV, consult your cable TV company. On the next
page, a possible using method of the converter/descrambler provided by your cable TV
company is explained. Please note: an RF switch provided with two inputs ( A and B ) is
required (not supplied).

ANTENNA CONNECTION

Cable TV
Converter/Descrambler
RF Switch Two-set signal
SPLITTER
12