DAEWOO ELECTRONICS DLN-15D3SHS Instruction Manual page 17

SWITCHING ON
1 If the indicator is not lit, the TV set is powered off. You must press the POWER button of
the TV set.
2 Press the POWER button on the remote controller on the TV set when the indicator is red.
The TV set will be switched on and the indicator will be changed to green.
SWITCHING OFF
1 To set the TV set back to stand-by mode, press the POWER button on the remote
controller on the TV set for 2 seconds. The indicator will become red.
2 Press the POWER button on the TV set to switch the TV set off completely.
* If you turn the TV off, the present time that you have set will disappear.
• If you don't use the set for extended periods of time, unplug the AC cord from power
outlet.
TV/AV MODE SELECTION
By pressing the TV/VIDEO button on the TV set,
you can
change the mode as follows:
TV AV S-Video
PC TV ....
With the remote controller, you can select the
mode as below.
• TV button : Selection for TV input mode.
• AV button : Selection for AV/S-Video input
mode.
• PC button : Selection for PC monitor input
mode.
• COMPONENT button : Selection for
Component input mode.
SWITCHING ON/OFF
Comp1 Comp2
17
Basic
Operations
COMPONENT
TV
AV
PC