Table of Contents
Advertisement
S
S
UPER
ERVER 2026GT-TRF User's Manual
!
Power Failure
When this LED fl ashes, it indicates a power failure in one of the power supplies.
3-4
Drive Carrier LEDs
Your server may use SAS or SATA drives. The use of SAS drives requires an op-
tional SAS controller installed to the system.
Two LEDs are located on the front of each drive carrier.
•
Green: Each drive carrier has a green LED. When illuminated, this green LED
(on the front of the drive carrier) indicates drive activity. A connection to the
backplane enables this LED to blink on and off when that particular drive is
being accessed.
•
Red: The red LED indicates a drive failure. If one of the drives fails, you should
also be notifi ed by your system management software. See Chapter 6 for in-
structions on replacing drives.
3-4
Advertisement
Table of Contents
