General - Biomega BioClave Operation Manual

1. General

The sterilizer described in this manual is intended for the sterilization
of research tools. It operates automatically with 134°C and 121°C
sterilization temperatures. This sterilizer is in compliance with the
European Directive 93/42/CEE and it has been produced in accordance
with the EN 13060. In addition the chamber has been ASME certified.
6 5
9 8 7
1 Distilled (clean) water tank
2 Display
3 Control panel
4 Power switch
5 F uses
6 Drain connector, clean water tank
7 Door handle
For safe operation, please pay close attention to the alert symbols
below which cab be found throughout this manual. Please
carefully read and understand the contents of this manual prior to
operating this instrument.
This symbol represents an electrical caution - ground protection
HOT SURFACE.
This symbol represents a hot surface
This symbol is used to draw the attention of the reader to
particularly important notions for operator safety.
1
1
1
10
2
11
12
3
13
4
14
8 Door
9 Drain connector, used water tank
10 Safety valve
11 Condenser ventilation
12 Serial / Electrical Label
13 Printer port (printer is optional)
14 Power supply cord
Instructions manual
Pressure psi
30
15
0
Pressure psi
30
15
0
Instructions manual
LIQUID
134°C
Time (min)
LIQUID
121°C
Time (min)
2 2