Table of Contents
Advertisement
Also, ensure that the rubber seal is free from debris, such
as sand or dust to prevent damage to the device.
• Do not expose the device to salt water, ionised water,
or soapy water.
• The back cover may be loosened if the device is
dropped or receives an impact. Ensure that the back
cover is properly aligned and tightly closed.
• If the device has been immersed in water or the
microphone or the speaker is wet, sound may not be
heard clearly during a call. Ensure that the microphone or
the speaker is clean and dry by wiping it with a dry cloth.
• If the device gets wet, dry it thoroughly with a clean,
soft cloth.
• The water-resistant design of the device causes it to
vibrate slightly in certain conditions. Vibrations in these
conditions, such as when the volume level is high are
normal and do not a ect the device's performance.
• The touch screen and other features may not work
properly if the device is used in water or in other
liquids.
Your device has been tested in a controlled
environment and certi ed to be water- and
dust-resistant in speci c situations (meets
requirements of classi cation IP67 as described
by the international standard IEC 60529 - Degrees
of Protection provided by Enclosures [IP Code];
test conditions: 15 - 35 °C, 86 - 106 kPa, 1 meter, 30
minutes). Despite this classi cation, your device is
not impervious to water damage in any situation.
Advertisement
Table of Contents
