Advertisement
SLEEP MODE
S
SLEEP ON: Press FUNCTION under the unit's ON
state until the unit enters the SLEEP mode. Press
ENTER/CANCEL to confirm.
S
SLEEP OFF: When the SLEEP function is activated,
press FUNCTION to enter the SLEEP mode. Next, press
ENTER\CANCEL to exit the function.
TURBO SETTING
S
TURBO: The unit on the high fan speed generates quick
cooling or heating so the room temperature can quickly
approach the setting value.
In the COOLING or HEATING mode press FUNCTION until
the unit enters the TURBO mode then press ENTER/CANCEL to
confirm.
In the COOLING or DRY modes, the temperature increases by
1.8_F (1_C) after the unit runs under the SLEEP mode for 1 hour
and 1.8_F (1_C) after another hour. Afterwards, the unit will
continue to run at this temperature.
In the HEATING mode, the temperature decreases by 1.8_F (1_C)
after the unit runs under SLEEP 1 for one hour and 1.8_F (1_C) after
another hour. Afterwards, the unit runs at this temperature (see Fig.
13).
Fig. 13 - Sleep mode
When the TURBO function is activated, press FUNCTION to
enter the TURBO mode and then press ENTER/CANCEL to
cancel (see Fig. 14).
Fig. 14 - Turbo mode
6
Advertisement
