Advertisement
TIMER SETTING
Under the ON/OFF state, press TIMER to set TIMER OFF/ON.
S
TIMER ON mode: Press TIMER and the LCD displays
xx.x hour, with "hour" blinking. Press
timing value. Next, press ENTER/CANCEL to confirm.
Timer range: 0.5−24 hours
Every press of
or
increases or decreases the set time by 0.5 hour, If either of the arrows are pressed continuously, the set time will
increase or decrease by 0.5 hour ever 0.5 seconds.
SWING MODE
S
SWING ON: Press FUNCTION under the unit's ON state
to activate the SWING function and
ENTER/CANCEL to confirm.
NOTES:
The SLEEP, TURBO or BLOW mode is the same as the SWING mode.
After the setting is made, the user must press ENTER/CANCEL to revert to the setting status or the unit stops operating automatically
five seconds later.
or
to adjust the
Fig. 11 - Timer off Setting under the unit's ON state
blinks. Next, press
Fig. 12 - Swing mode
S
TIMER OFF mode: Press TIMER, if LCD does not
display xx.x hour, it means the timer setting was cancelled
(Fig. 11 displays the TIMER OFF setting, under the ON
state).
S
SWING OFF: When the SWING function is on, press
FUNCTION to enter the SWING setting interface
press ENTER/CANCEL to cancel the function (see Fig. 12).
5
. Next,
Advertisement
