Maintenance; General; Daily Maintenance; Air Filter - Husqvarna PP65 Operator's Manual

General

WARNING! The user must only carry out
!
the maintenance and service work
described in this Operator's Manual.
More extensive work must be carried out
by an authorized service workshop.
The life span of the machine can be reduced and the risk
of accidents can increase if machine maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest service workshop.

Daily maintenance

• Check that the machine's safety equipment is
undamaged. See instructions in the section
"Machine's safety equipment".
• Check that the cables including any extension leads
are intact and in good condition.
• Always clean all the equipment at the end of the
working day. Use a heavy-duty hand-held brush or a
large paint brush.
• Make sure to keep the connectors and pins clean.
Clean with a rag or brush.
NOTICE! Do not use a high pressure washer to clean
the machine. The high pressure jet can damage seals
and lead to water and dirt permeating into the machine,
resulting in serious damage.

MAINTENANCE

Air filter
NOTICE! The air filter must not be cleaned or blown
clean with compressed air. This will damage the filter.
A blocked air filter can cause power unit overheating.
Check the air filter and replace if necessary.
• Dismantle the air filter cover. Use torx key no. 27.
• Unsnap the metal frame to access the cover.
• Change the filter.

Service

!
WARNING! All types of repairs may only
be carried out by authorised repairmen.
This is so that the operators are not
exposed to great risks.
–
English 15