Table of Contents
Advertisement
11. Maintenance of Silk'n SensEpil™
11.1. Cleaning Silk'n™ SensEpil
After each hair removal session, it is recommended to clean your Silk'n SensEpil™ device, and especially the
Unplug Silk'n SensEpil™ before cleaning.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment to gently wipe Silk'n SensEpil™ surface, and especially the
.
APPLICATOR TIP
Never immerse Silk'n SensEpil™ or any of its parts in water!
11.2. Replacing the LAMP CARTRIDGE
The Silk'n SensEpil™
DISPOSABLE LAMP CARTRIDGE
intensity is determined only according to the energy level setting of the device. There is no decrease of energy during the usable lifetime of the
.
CARTRIDGE
When a D
ISPOSABLE LAMP CARTRIDGE
blinking, indicating that the
DISPOSABLE LAMP CARTRIDGE
Once all 750 pulses in a
DISPOSABLE LAMP CARTRIDGE
pulses can not be emitted.
In order to continue the hair removal session, it will now be necessary to replace the
Note:
To replace a
DISPOSABLE LAMP CARTRIDGE
1. Press the
POWER ON/OFF SWITCH
2. Unplug the power cord from the electrical outlet.
3. Grasp the used
DISPOSABLE LAMP CARTRIDGE
normal trash.
4. Unwrap a new
DISPOSABLE LAMP CARTRIDGE
5. Push the new
DISPOSABLE LAMP CARTRIDGE
If correctly installed, the
DISPOSABLE LAMP CARTRIDGE
12. Troubleshooting
12.1. "My Silk'n SensEpil™ does not start."
Make sure the power cord is properly connected to the Silk'n SensEpil™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
14
can fire 750 light pulses that would typically cover 2 Legs, Arms, Under arms, and Bikini line. Pulse
has reached 90% of its possible lifetime the
should soon be replaced.
have been used the
A DISPOSABLE LAMP CARTRIDGE
:
to turn Silk'n SensEpil™ off.
on both sides, pull it out of the socket and discard with
.
gently into place.
will spring back when pushed in and released.
REPLACE CARTRIDGE INDICATOR LIGHT
REPLACE CARTRIDGE INDICATOR LIGHT
DISPOSABLE LAMP CARTRIDGE
should also be replaced if large spots appear inside it or if its
.
APPLICATOR TIP
on the
CONTROL PANEL
will be steadily on, indicating that further
.
is broken.
LENS
LAMP
will start
Hide quick links:
Advertisement
Table of Contents
