Close The Top Cover - Kyocera Mita FS-3700 Manual

5. When the toner container is installed cor-
rectly on the developer, push the top of the
container unit ("PUSH HERE") until it locks in.
*
Make sure that the toner container
is properly locked in the printer.
3—Close the Top Cover
Close the top cover by pressing the arrowed
part in this diagram.
4—Install the Waste Toner Bottle
The waste toner bottle is in the toner kit supplied with the printer. The waste toner bottle
must be installed in the printer.
Install the waste toner bottle in the printer as follows.
1. Take the waste toner bottle from the toner
kit supplied.
*
Do not cap the waste toner bottle.
1.4. Setting Up and Interfacing
Top Cover
Cap
Top Cover
Waste Toner
Bottle
1-9