Where To? - Point On Map - Uconnect 6.5 NAV Owner's Manual Supplement

2. Press the "OK" button.
3. Enter the Longitude by typing in the numbers. Use the
"Left and Right" arrows to select specific numbers in
the location shown.
NOTE: Press the "Format" button to change the format of
the Latitude/Longitude entry.
4. Press "OK" to confirm the destination.
5. Press the "Yes" button to confirm your destination and
begin your route.
NOTE: If you are currently on a route guidance and you
select a GEO Coordinate, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
You can press the "Back Arrow" button to return to the
previous screen or the "X" button to exit.
Where To? — Point On Map
To enter a destination by Point on Map, press "Where
To?" in the Nav Main Menu and then press the "Point on
Map" button.
1. Use the touchscreen to drag the center of the cross
over the desired destination.
2. Either press the "address bar" at the top center of the
screen to confirm your location or press the "Details"
button in the upper right corner to display the avail-
able locations near that point on the map.
3. Press the "Yes" button to confirm your destination and
begin your route.
NAVIGATION 107
8