Configure With Windows Xp Wireless Zero Configuration - LG PW-DN427 User Manual

list. Enter Test for the Profile Name, and select Infrastructure for the Network Type, then click
Next icon to the next page. Select WPA2-PSK for the Authentication, AES for the
Encryption and click Next icon
make some advanced settings in the following screens or you are recommended to leave the
options default if you are not sure about them.
4. Highlight the profile named Test on the profile list and click Active icon
screen. The utility will establish a connection with this AP by configured profile.

3.2 Configure with Windows XP Wireless Zero Configuration

1. Right click the icon
the Use Zero Configuration as Configuration Utility option to enable Wireless Zero
Configuration function.
Figure 3-32 Use Zero Configuration as Configuration utility
2. After that, double click the icon
available wireless network choices. You can highlight a network and then click Connect to
add to a network.

Note:
If you have not installed SP2 for Windows XP, the screen above will not be available.
3. Enter the key and click Connect to continue.
PW-DN427
to continue. Enter 1234567890 for the Key. You can
on the bottom of the desktop first and you will see Figure 3-32. Click
, and the following Figure 3-33 will appear with some
Figure 3-33 Choose a Wireless Network
- 26 -
Wireless N USB Adapter User Guide
on the Profile