5.1 REMOTE CONTROLLER INSTALLATION
●
The remote controller comes with the length of 10m cable, If a longer cable is needed,please purchase
shielding line.Cut the original line and bind up the wire according to the polarity to avoid shortcircuit.
a.Minimun 18AWG wire
b.Maximum 60m long
●
Put out wiring downward through the cable trench.
●
Attach the remote control on the wall with two attached screws. (If you need to attach the remote
control to brittle material, you should use the anchor plug.)
!
●
DO NOT locate the remote controls where they may come into contact with water.
●
DO NOT position the remote controls in the vicinity of chemicals.
●
DO NOT position the remote controls over a cooker, grill or toaster.
●
DO NOT position the remote controls where materials may spill onto them.
●
PLEASE NOTE IF THE CONTROLS ARE TO BE FITTED TO A METAL SURFACE AN
INSULATION PLATE SHOULD BE PROVIDED BEHIND THE MOUNTING POSITION.
102mm
WARNING
15