Table of Contents
Advertisement
4.7 ELECTRICAL CONNECTION
●
The water heater must be electrically grounded. Do not attach the ground wire to either the gas or
water piping.
●
The water heater requires an AC 240V 50Hz electrical power supply and draws a current of 0.8A.
●
The weather-proof power point should be no more than 1 meter from the base of the water heater for
easy access.
●
Install power switch so that the electrical power can be switched off if necessary.
●
If the cord supplied with this appliance must be replaced, it must be replaced with appliance wiring
material supplied by the Manufacturer.
!
When servicing or replacing parts within the water heater, label all wires prior to disconnec-
tion to facilitate an easy and error free reconnection. Wiring errors can cause improper and
dangerous operation. Verify proper operation after servicing
Weather-proof Power Point
WARNING
13
Advertisement
Table of Contents
