Level Ii Programming - P Values; Programming The Lockout Feature - GE Pro Elite 268-716-150-1248 Operation Manual

Level II Programming – P Values
Level II program parameters can be adjusted and used
to fine-tune the conditioner's operation. The parameters
are accessible by pressing and holding the UP and DOWN
buttons until the control displays a "P" value. Note: The
control must be in the home position to change settings.
See Table below for Level ll parameters. Typically the Level
ll parameters will not need to be adjusted, as the default
settings accommodate most applications. Contact your
Water Treatment Professional before attempting any
programming.
P# Description
Time of Day
P1
P2 Day of Week
Time of Regen
P3
P4 Day Override
P5 Not Used
Salt Setting
P6
Capacity
P7
(View Only)
P8 Not Used
P9 Units of Measure
P10 Clock Mode
P11 Service Interval
Minimum
P12 Days Between
Regeneration
Low Salt Sensitivity
P13
Disable Probes
P14

Programming the Lockout Feature

All parameters can be locked out when the control is in
Level ll programming. Simply press the REGEN button
during Level ll programming and a Lock icon will appear
indicating that the specific setting has been locked out.
When locked out, the setting cannot be adjusted. To
disable the Lock Out Feature, press the REGEN button
when in Level ll. The lock icon will not be displayed.
Minimum
Range
Increments
12 Hr
1 Min 12:00PM
24 Hr
Sun-Sat 1 Day
12 Hr
1 Min 12:00PM
24 Hr
0-30 1 Day
3-18 1
50-290 10
1-140 1
Calculated
0.1-14.0 0.1
0-1 1
0-1 1
0-99 1
0-14 1
0-2 1
0-1 1
Default Units
Range dependent on P10 setting
Hr./Min.
Sun Days Set to actual day of the week
Range dependent on P10 setting
Hr./Min.
0 Days 0 = Disabled
9 Lbs/Cu ft Set in Level I Programming
3
g/L
110
Kilograins Values dependent on P9 setting
Kilograms
0 0 = US
0 0 = 12 Hr
0 Months 0 = Disabled
0 Days
0 = Highest Sensitivity
1 = Mid Sensitivity
2
2 = Lowest Sensitivity
3 = Turn Off Check Salt Light Function
0 = Normal Operation
0
1 = Probes Disabled; No Err6
Time/Day
Regeneration Time/Day
Salt Amount
Capacity
20
Notes
1 = Metric
1 = 24 Hr
30 Day Month
SU MO TU WE TH FR SA DAYS
PM
Check Salt