Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna MS 360 G Operator's Manual

Symbols on the machine

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand the
instructions before using the machine.
Always wear:
• Hearing protection
• Protective goggles or a visor
• Breathing mask
WARNING! Keep your hands and feet away
from the blade.
WARNING! Never cut without using the
blade guard.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, clothes, dry
grass etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw blades
Use no hooks to lift the tile saw.
Lock function
Hot surface.
2 – English

KEY TO SYMBOLS

Other symbols/decals on the machine refer to special
certification requirements for certain markets.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
NOTICE! CALIFORNIA AIR RESOURCES BOARD
(CARB): This machine is considered a preempt Off-
Road Applicatoin as relating to CARB standards. The
U.S. EPA has sole authority to establish emission
standards for preempt construction equipment. For
more information see www.arb.ca.gov/msprog/offroad/
preempt.htm

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
NOTICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CAUTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.