Configuring General Wlan Properties (Gui) - Cisco Catalyst 3650 Series Configuration Manual

Configuring WLANs

Configuring General WLAN Properties (GUI)

Use this procedure to perform the following actions on a WLAN:
• Set WLAN Status
• Configure Radio Policies
• Assign Interface/Interface Groups
• Enable or Disable Multicast VLAN Feature
• Enable or Disable Broadcast SSID Feature
Before You Begin
Step 1 Click Configuration > Wireless.
The WLANs page is displayed.
Step 2
Locate the WLAN you want to configure by using the search mechanisms on the page.
Step 3 Click on the WLAN Profile of the WLAN.
The WLAN > Edit page is displayed.
Step 4
Click the General tab. This tab is displayed by default.
Step 5 Configure the General parameters.
Parameter
Profile Name
Type
SSID
Status
Security Policies
Radio Policy
OL-32353-01
Description
Displays the configured profile name of the WLAN.
Displays the configured LAN type.
Displays the configured SSID of the WLAN.
Check box to enable the WLAN. The default value is enabled.
WLAN security policies set using the Security tab.
WLAN radio policy to enable radios on the WLAN. Values are the following:
• All
• 802.11a only
• 802.11g only
• 802.11a/g only
• 802.11b/g only
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)

Configuring General WLAN Properties (GUI)

35