How To Configure Access Point Groups; Creating Access Point Groups - Cisco Catalyst 3650 Series Configuration Manual

Configuring Access Point Groups

How to Configure Access Point Groups

Creating Access Point Groups

Before You Begin
You must have administrator privileges to perform this operation.
SUMMARY STEPS
1. configure terminal
2. ap group ap-group-name
3. wlan wlan-name
4. (Optional) vlan vlan-name
5. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 ap group ap-group-name
Example:
Switch(config)# ap group my-ap-group
Step 3 wlan wlan-name
Example:
Switch(config-apgroup)# wlan wlan-name
Step 4 vlan vlan-name
Example:
Switch(config-apgroup)# vlan test-vlan
Step 5
end
Example:
Switch(config)# end
This example shows how to create an AP group:
Switch# configure terminal
OL-32353-01
Purpose
Enters global configuration mode.
Creates an access point group.
Associates the AP group to a WLAN.
(Optional)
Assigns the access point group to a VLAN.
Returns to privileged EXEC mode. Alternatively, you
can also press Ctrl-Z to exit global configuration mode.
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
How to Configure Access Point Groups
79