Calculator; Countdown Timer - Sanyo SCP-3810 Operating Manual

9.
Select a ringer length for the alarm by highlighting the ringer length field and pressing
MENU/OK.
10. Select a snooze interval minutes for the alarm by highlighting the snooze interval field and
pressing MENU/OK.
11. Select a snooze times for the alarm by highlighting the snooze times field and pressing
MENU/OK.
12. Press SAVE (left softkey).
To respond to an alarm:
► Press any key (except END/, BACK, and the right softkey) to stop the alarm and start
snooze mode.
► Press DISMISS (right softkey), END/, or BACK, to clear the alarm.

Calculator

Your phone comes with a built-in calculator.
1. Press MENU/OK > Tools > Calculator.
2. Enter numbers using your keypad.
Press the appropriate navigation key for an arithmetic option (Up: Addition, Down:
Subtraction, Left: Multiplication, Right: Division).
Press the left soft key to enter a decimal point
Press CLEAR (right softkey) to clear all numbers.
3. Press MENU/OK for the total.

Countdown Timer

This feature allows you to use your phone as a countdown timer to alert when a specific
period of time has elapsed. You can set up to five timers. This feature is not available while
your phone is turned off.
1. Press MENU/OK > Tools > Countdown.
2. Highlight a countdown number and press MENU/OK.
3. Highlight an item to set and press MENU/OK.
Description to enter a description of the countdown.
Time to enter the length of the countdown.
Alarm to set the countdown alarm to on or off.
4. Press SAVE (left softkey) to save the countdown settings.
Tip: Press ON or OFF (left softkey) to toggle countdown alarm on and off.
To change the alarm settings, press SETTINGS (right softkey) to set the ringer length
and snooze options.
To respond to the alarm:
► Press any key (except END/, BACK, and the right softkey) to stop the alarm and start
snooze mode.
► Press DISMISS (right softkey), BACK, or END/ to clear the alarm.
43