Adjusting White Balance; Adjusting Sharpness; Adjusting Contrast; Camera Settings - Sanyo SCP-3810 Operating Manual

Adjusting White Balance

1. From camera mode, press OPTIONS (right softkey) > Image Controls > White
Balance.
2. Select Auto, Sunny, Cloudy, Tungsten, Fluorescent, or Manual. When Manual is
selected, press the navigation key right or left or the side key up and down to adjust
the white balance.

Adjusting Sharpness

1. From camera mode, press OPTIONS (right softkey) > Image Controls > Sharpness.
2. Select Auto or Manual. When Manual is selected, press the navigation key right or
left to adjust the sharpness.

Adjusting Contrast

1. From camera mode, press OPTIONS (right softkey) > Image Controls > Contrast.
2. Select Auto or Manual. When Manual is selected, press the navigation key right or
left to adjust the contrast.

Camera Settings

You can set various settings to your taste.
1. From camera mode, press OPTIONS (right softkey) > Camera Settings.
2. Highlight an options and press MENU/OK:
Resolution to select a picture's file size (1.3M-960 x1280, Medium-480x640, or
Low-240x320).
Quality to select the picture quality setting (Fine, Normal, or Economy).
Shutter Sound to select a shutter sound (Default, "Say Cheese", "Ready", or
Off).
Status Bar to show or hide the status indicators and softkeys. These can be
shown and hidden by pressing the navigation key up and down.
Save Setting to select the way to save pictures.

User Settings

The camera mode is launched with its default camera settings each time it is activated. You
can save your favorite camera setting options as you preferred settings.

Saving a User Settings

1. Set your favorite camera settings following the steps in "Camera Mode Options" and
"Camera Settings" above.
2. From camera mode, press OPTIONS (right softkey) > User Settings.
3. Highlight an unassigned number and press MENU/OK > YES (left softkey). (The
Default keeps the original settings.)
4. Enter a title and press MENU/OK.
5. Confirm the settings and press MENU/OK.

Selecting a User Settings When Taking Pictures

The selected settings are effective until either another setting is selected or the camera
mode is deactivated.
1. From camera mode, press OPTIONS (right softkey) > User Settings.
49