Harbor Freight Tools Vulcan Migmax 215 Owner's Manual & Safety Instructions page 49

Interior Controls
Wire Spool
Spool Knob
Note: When using an optional Spool Gun (sold separately), connect the Spool Gun gas
hose to the Spool Gun Gas Outlet (see Front Panel Controls on previous page).
Weld Settings
Refer to the Settings Chart on the inside of the Welder door for Flux-Cored and MIG Weld
settings. The chart is only intended to show general guidelines for different wire sizes and for
different thicknesses of material. The initial settings used at the beginning of a weld may need to be
adjusted after stopping and carefully inspecting the weld. Proper welding takes experience.
Item 63617
Wire Feed
Mechanism
Wire Inlet
Liner
For technical questions, please call 1-888-380-0318.
Cold Wire
Feed Switch
Polarity Cables
Feed
Tensioner
Idler
Arm
Feed
Roller Knob
Page 17