Rath Command Center Installation & Operation Manual
Hide thumbs
Also See for Command Center:
- Installation & operation manual (12 pages) ,
- Installation & operation manual (10 pages) ,
- Installation & operation manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for Rath Command Center
Summary of Contents for Rath Command Center
- Page 1 Installation & Operations Manual Command Center N56W24720 N. Corporate Circle Sussex, WI 53089 RP8500PBX 800-451-1460 262-246-4828 (fax) Made in the USA Ver. 12 www.rathmicrotech.com www.area-of-refuge.com 3 Year Warranty 11/17...
-
Page 2: Table Of Contents
Thank you for purchasing Rath’s Command Center. We are the largest Emergency Phone Manufacturer in North America and have been in business for over 35 years. We take great pride in our products, service, and support. Our Emergency Phones are of the highest quality. -
Page 3: Items Included
The Command Center connects to Card 1 of the Distribution Module (see pages 6-7). Note: The maximum cable length to Command Center is 6200’ for 22 GA cable and 3900’ for 24 GA cable. b. If Command Center includes auxiliary Button Console or Secondary Station, connect to the Distribution Module per the following: i. -
Page 4: Phone Programming
2. Follow the directions that came with the Emergency Phone to program Memory Location 1 to dial 3931 Emergency Phone Calls the Command Center First then a Number Outside of the Building: 1. The Emergency Phone can be programmed to call the Command Center first and if that call is not answered, call an outside number 2. -
Page 5: Operating Instructions
2. Blue LED Light– Active Call 3. Blue LED Flashing– Call on Hold Answering Call at Command Center: 1. Lift handset to answer first incoming call 2. If multiple calls, press red LED light of next desired call (this will place the original call on hold) Disconnecting Calls: 1. -
Page 6: Wiring Diagrams
Typical System Layout Page 5... - Page 7 B. On the top of each card, there is a table indicating port usage: 1. SLT is the port used for connecting Emergency Phones 2. DKP is the port used for connecting Command Center Phone(s) 3. TWT is the port used for outside Telco Line C.
- Page 8 1. S01-S__ are the port(s) used for connecting Emergency Phones 2. The TD(1-2)(3-4) with a dot under the “D” is the port used for connecting Command Center Phone(s) 3. TD(1-2)(3-4) with a dot under the “T” is the port used for outside Telco Line C.
Need help?
Do you have a question about the Command Center and is the answer not in the manual?
Questions and answers