Monoprice 24740 User Manual page 5

4. MAIN: Press the button to select the video source.
5. MODE: Press the button to cycle through the five display modes.
Rear Panel
1. INPUT: HDMI® ports for connecting up to four video source devices.
2. OUTPUT: HDMI port for connecting the video display.
3. RS-232: 3-pin terminal block for connecting to a computer for RS232 control.
4. DC 5V: DC barrel connector for connecting the included AC power adapter.
IR Remote Control
1. Power: Press the button to turn the unit on or to put
it into standby mode.
2. RESO.: Press the button to switch the output
resolution between 720p and 1080p.
3. Mode: Press one of the five display buttons to set the
display mode. Pressing the last button causes the unit
to continuously cycle through the five display modes.
4. Audio: Press a button to select which of the four
inputs is the audio source or to mute audio.
5