Setting Redial Interval; Setting The Number Send To External Subscribers - Avaya 1408 User Manual

Setting redial interval

When you activate automatic redial: Use this procedure to set the time that elapses between
two automatic redials.
You can select times of 15, 30, 60, 90 or 120 seconds.
1. Press the Avaya Menu button.
2. Select Settings.
3. Press the OK button.
4. Select Dial settings.
5. Press the OK button.
6. Select Redial every ... s.
7. Press the Modify softkey several times until the desired time interval is shown.
8. Press the Back softkey.

Setting the number send to external subscribers

For external calls, you can specify whether a number is passed to the subscriber. You can also
specify whether this is your internal extension number or only the company telephone number.
This feature must be supported by your network provider.
Note:
You can also suppress number display for the next call only (Anonymous calling)
1. Press the Avaya Menu button.
2. Select Settings.
3. Press the OK button.
4. Select Dial settings.
5. Press the OK button.
6. Select Remote no. disp.
1408/1416 at Integral 5 - User Guide
The new setting is saved.
Setting redial interval
May 2010 75