Cycle And Option Descriptions - Whirlpool WDT995SAFM User Instructions

Table of Contents

Estimated cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected.

You can customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not used to

hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle. This is

normal and will provide optimal cleaning performance.

CYCLE SELECTIONS

The most advanced and versatile cycle. This cycle senses load size, soil amount,

and toughness of soil, to adjust the cycle for improved cleaning, using only the

amount of water and energy needed. Use for all soil levels.

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

This cycle with only the Heat Dry option selected, and without other options

selected, is recommended to completely wash and dry a full load of normally soiled

dishes. The energy usage label is based on this cycle and option combination.

For fast results, 1-Hour Wash will clean dishes using slightly more water and energy.

Select the Heat Dry option to provide best dry performance.

This cycle quietly soaks dishes with an extended prewash, which eliminates the

need to presoak dishes, saving personal time and effort. For optimal cleaning results

during the Soak & Clean cycle, add prewash detergent. Use this cycle for loads with

heavy amounts of dried on or hard to clean baked-on food.

This is a specialty cycle that you select from the Whirlpool

to your dishwasher. Your dishwasher remembers this cycle until you replace it by

downloading another cycle from the Whirlpool

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the

cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle

will automatically compensate by adding time, heat, and water as needed.

Cycle and Option Descriptions

CYCLES

app.

app and download

ESTIMATED

WATER

WASH TIME

USAGE

DISPLAYED

GALLONS

HH:MM W/O

(LITERS)

OPTIONS