Cycle And Option Descriptions - Whirlpool WDTA75SAHN0 User Instructions

Table of Contents

Available languages

Estimated cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected.

You can customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not used to

hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle. This is

normal and will provide optimal cleaning performance.

CYCLE SELECTIONS

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts

the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy,

the cycle will automatically compensate by adding time, heat, and water as needed.

This cycle senses the load size, soil amount, and toughness of soil to adjust

the cycle for improved cleaning, using only the amount of water and energy

needed. The Sensor cycle is automatically selected if you first press the Start/

Resume keypad.*

Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware.

This cycle is recommended for daily, regular, or typical use to completely wash

and dry a full load of normally soiled dishes. This dishwasher's government

energy certifications were based on the Normal cycle with only the Heated Dry

option selected.**

For fast results, 1-Hour Wash will clean dishes using slightly more water

and energy. Select the Heat Dry or Extended Dry options for better drying

performance.

This cycle quietly soaks dishes with an extended prewash, which eliminates the

need to presoak dishes, saving personal time and effort. For optimal cleaning

results during the Soak & Clean cycle, add prewash detergent. Use this cycle

for loads with heavy amounts of dried-on or hard to clean baked-on food.

This is a specialty cycle that you select from the Whirlpool

to your dishwasher. Your dishwasher remembers this cycle until you replace it

by downloading another cycle from the Whirlpool

*The government energy certifications are not based on this cycle. See the Normal cycle description for the government energy

certification cycle. Using the Sensor cycle may increase your energy usage.

**No other washing and drying temperature options were selected, and it was not subject to truncated testing. Rinse aid was not used,

and there was no detergent used in the prewash.