Huawei EchoLife HG550 User Manual page 24

Click Cancel to quit configuration without saving the
changes.
Click Next to display the Connection Type page.
For the parameter explanation of the Connection Type page,
see Table 3-2.
Click Back to go back to the previous page.
Click Cancel to quit configuration without saving the
changes.
Click Next to display the WAN IP page.
Table 3-4 shows the parameter explanation of the WAN IP page.
Item
The Access
Configurator
Option
Access
Concentrator
WAN IP Settings
WAN IP Address
Enable NAT
Add Default Route
Click Back to go back to the previous page.
Table 3-4 Parameters in the WAN IP page
Check the box to enable the access configuration
option.
Enter the IP address of the access concentrator.
If you
automatically, system will obtain an IP address
automatically from remote DHCP server.
If you select use the following IP address, you
will need to enter the IP address provided by
your ISP.
Enter the IP address of WAN interface provided by
your ISP.
You can check the box to enable NAT or leave it
unchanged to disable NAT.
You can check the box to enable adding default
route or leave it unchanged to disable it.
Huawei Technologies Proprietary
Configuration
select Obtain
14
an IP address