Table of Contents
Advertisement
III. Connect the power supply
Use the power adapter to connect the POWER interface of
HG550 with the power socket.
IV. Start up the network devices
Switch on HG550 and start up your computer, hub or other
network devices.
V. Configure HG550 through the Web interface
For detailed configuration descriptions, see "Chapter 3 Common
Configuration".
2.2 Simple Configuration
2.2.1 Preparing for Configuration
Before the configuration, make sure that you have made the
following preparations:
1)
Connect HG550 and your computer with a network cable.
2)
Power on HG550 and start up the computer.
3)
Configure the computer to obtain IP address automatically.
Alternatively, configure your computer to be in the same
network segment as HG550. The default IP address of
HG550 is 192.168.1.1.
2.2.2 Logging In to the Configuration Interface
The steps are as follows:
Huawei Technologies Proprietary
7
Hide quick links:
Advertisement
Table of Contents
