Page 1
LOT NUMBER: DATE PURCHASED: / Halsted 54" Fireplace Console Model # WSF54BF23-3 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your...
Page 2
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOGUE: Halsted 54" Fireplace Console (WSF54BF23-3) MADE IN CHINA FITS UP TO MOST 165.1 cm / 65 in.
Page 3
IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH A DAMP CLOTH.
Page 4
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel (Qty. 1) B- Center Shelf (Qty. 1) C- Bottom Panel (Qty. 1) D- Upper Side Panel Assembly E- Upper Partition Panel F- Left Lower Side Panel (Qty.
Page 5
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. S- Adjustable Shelf T- Top Stretcher Fireplace Insert Remote Control with Battery (Qty. 2) (Qty. 1) (Qty. 1) (Qty.
Page 6
Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A) and the Bottom Panel (C) using a Phillips screwdriver.
Page 7
Assembly Instructions 4. Securely screw seventeen Cam Bolts (2) into the designated small holes on the Center Shelf (B) on both sides. 5. Insert two 30 mm Wood Dowels (3) into the inner holes of the Middle Crossbar Assembly (J). Tap in with a rubber mallet, if necessary.
Page 8
Assembly Instructions 7. Align and attach the Left Middle Stile (K) to the Left Lower Partition Panel (H) with two 30 mm Wood Dowels (3) and two Cam Locks (1). 8. Repeat the same procedure to combine the Right Middle Stile (L) with the Right Lower Partition Panel (I). 9.
Page 9
Assembly Instructions 10. Attach the assembled Lower Partition Panels (H and I) to the Bottom Panel (C) with the Middle Stiles (K and L) facing forward, using four 30 mm Wood Dowels (3) and four 50 mm Screws (7) as shown. 11.
Page 10
Assembly Instructions 13. Glue eight 30 mm Wood Dowels (3) into the inner holes on the vertical panels (F, G, H, and I). Position the Center Shelf (B) onto the inserted Wood Dowels (3) and fasten it in place with eight Cam Locks (1). 14.
Page 11
Assembly Instructions 15. Attach two Upper Side Panel Assemblies (D) to the Top Panel (A) with four 30 mm Wood Dowels (3) and four Cam Locks (1) as shown. 16. Fasten the Upper Partition Panel (E) to the Top Panel (A) with one 30 mm Wood Dowel (3) and two Cam Locks (1) as shown.
Page 12
Assembly Instructions 18. Attach the Base Front Stretcher (N) to the Bottom Panel (C) with three 30 mm Wood Dowel (3) and four Cam Locks (1) as shown. 19. Fasten the Base Front Stretcher (N) to the Lower Side Panels (F and G) with four 50 mm Screws (7).
Page 13
Assembly Instructions 20. Glue four 20 mm Wood Dowels (4) into the inner holes on the Base Front Molding (M) and attach it to the Base Front Stretcher (N) with eight 25 mm Screws (6). 21. Screw two Floor Levelers (15) into the threaded inserts on the Base Front Molding (M) and set to the correct height.
Page 14
Assembly Instructions 22. Flip the assembly around at its front edges. 23. With the pilot holes as a guide, fasten two Straight Metal Brackets (9) at the joints between the Middle Crossbar (J) and Middle Stiles (K and L), using two 15 mm Flat Head Screws (5) per bracket. 24.
Page 15
Assembly Instructions 28. Stand the unit upright. 29. Attach one Handle with Back Plate (12) to the front side of each Door (R) with two Handle Bolts (13). 30. Pick up one Door (R) and attach the extended Hinge Arms to the Hinge Bases installed on the Left Lower Side Panel (F).
Page 16
Assembly Instructions 34. Stick the Rubber Bumpers (16) at the outer corners of the two Doors (R) where they meet the Lower Partition Panels (H and I). 35. Plug the Cam Lock Covers (10) onto the visible Cams Locks to conceal the cams. 36.
Page 17
Assembly Instructions NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the console. 39. Remove the paper backing from the acrylic stopper (17), then properly align the acrylic stopper into the cut-out on the acrylic stopper template on the Top Panel (A).
Page 18
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
Need help?
Do you have a question about the WSF54BF23-3 and is the answer not in the manual?
Questions and answers