To Re-Attach The Fabric - Chicco Fit 2 Instructions

TO RE-ATTACH THE FABRIC:

Thread Comfort Flex pads through the seat pad. Adjust
15
Head Rest to lowest position and place the seat pad onto the
Carrier shell. Slide fabric opening around the Head Rest Frame.
Guide the edge of the fabric into the groove around
17
the entire top of the Carrier frame. A ruler or card may be
needed to help press the fabric into place.
Thread the crotch strap and the Harness Straps
19
through the correct openings. Wrap both Comfort Flex
pads around each waist strap and re-attach the Hook and
Loop fastener.
Thread the hook and loop Fabric Straps through the
21
two slots on the Carrier shell, as shown.
On the top of the Carrier, fold the plastic tab under the
16
fabric and tuck it into the Carrier frame. Press down firmly. A
ruler or card may be needed to lock the plastic tab into place.
Adjust the Head Rest to the highest position. Then
18
pull the fabric behind the Head Rest Back Plate to make
sure the Head Rest Back Plate sits on TOP of the seat pad.
Fit the fabric around the edges of the Harness
20
Adjuster Strap Cover.
Fabric Strap Slot
Pull down firmly on the Fabric Straps to help guide the
22
fabric further into the Carrier shell. Wrap straps around the
bottom of the Handle and attach. Repeat for the other side.
3