Default Settings - Zhone SkyZhone 1604 Hardware Installation Manual

Default settings

Configuration Item
Login
Password
WLAN 0
WLAN 1
Default VLANs
VLAN 1 port
membership
VLAN 7 port
membership
WLAN 0 SSID 1
WLAN 0 SSID 2
WLAN 0 SSID 3
WLAN 0 SSID 4
WLAN 0 SSID security
WLAN 0 Admin State
WLAN 0 Radio Name
WLAN 0 Hardware
Mode
WLAN 0 Rates
WLAN 0 Channel Policy
WLAN 0 Channel
WLAN 0 Beacon
Interval
WLAN 0 Broadcast
SSID
WLAN 0 RTS Threshold
WLAN 0 Fragment
Threshold
WLAN 0 DTIM period
WLAN 0 Preamble Type
WLAN 0 Antenna Power
of 192.168.1.1. If a static IP address is set on your PC that is on the same subnet
(for example, 192.168.1.100), then use HTTPS to configure the remaining
parameters. Note that the SkyZhone access point uses HTTPS and not HTTP.
The default login is admin and the default password is zhone.
Note that if the IP address of the management VLAN is changed, you lose your
connection to the SkyZhone unit. A new static IP address must be configured on
your PC that is compatible with the new IP address that you configured in the
SkyZhone unit.
Also, if any changes have been made to the VLAN definitions, the
corresponding changes will have to be made in the DSLAM that the SkyZhone
is connected to.
SkyZhone 1224
Single 2.4 GHz
admin
zhone
2.4GHz
N/A
0 – internal
1 – data
7 - management
Eth0 – tagged
Eth1 – tagged
WLAN 0 - tagged
Eth0 – tagged
Eth1 – untagged
SkyZhone
-
-
-
none
Up
2.4GHz
g
auto
Fixed
6
200
Enabled
2347
2346
2
Long
0 dB
SkyZhone 1604, 1404, 1204 Hardware Installation Guide
SkyZhone 1624 SkyZhone 1424
2.4 GHz, 4.9 GHz Single 4.9 GHz
admin admin
zhone zhone
2.4 GHz N/A
4.9 GHz 4.9 GHz
0 – internal 0 – internal
1 – data 1 – data
7 - management 7 - management
Eth0 – tagged Eth0 – tagged
Eth1 – tagged Eth1 – tagged
WLAN 0 - tagged
Eth0 – tagged Eth0 – tagged
Eth1 – untagged Eth1 – untagged
SkyZhone N/A
- N/A
- N/A
- N/A
none N/A
Up N/A
2.4GHz N/A
g N/A
auto N/A
Fixed N/A
6 N/A
200 N/A
Enabled N/A
2347 N/A
2346 N/A
2 N/A
Long N/A
0 dB N/A
41