Advertisement
Quick Links
When using this product for
more than 3 years, materials
may deteriorate causing
unexpected danger.
Do not use it to avoid any
unexpected accident.
Join Baby Carrier
Instruction Manual
Rear facing
Back carrying
cuddling
● Please thoroughly read this manual
before and use the product accordingly.
Otherwise such a misuse may injure
baby.
Side carrying
CAUTION
● Please keep this manual in a convenient
place for ease of future reference.
● If you pass this product to others,
please make sure to attach this manual
to the product.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Combi Join
Summary of Contents for Combi Join
- Page 1 Join Baby Carrier Instruction Manual Rear facing Back carrying Side carrying cuddling CAUTION When using this product for ● Please thoroughly read this manual ● Please keep this manual in a convenient more than 3 years, materials before and use the product accordingly.
-
Page 2: Before Use
Before use ■ Age reference for applicable baby Thank you for purchasing Join Baby Carrier. This product is a generic single-baby carrier designed for cudding or Age reference back carrying a baby during shopping or outdoor activities. Carrying style Weight... - Page 3 WARNING [ Fixation ] Always secure the following buckles when use. Otherwise baby may fall from the carrier. ● Rear facing cuddling ● Back carrying ● Side carrying • Hold buckle • Support buckle • • Support buckle • Hold buckle Hold buckle •...
- Page 4 WARNING It might lead to an unexpected accident such as falling out from an opening or suffocation please adjust and secure all the components. Please carry and put down the When the carrier is in use,please do In cradling or cuddling Pay attention if baby’s face is too close to baby at a safe place such as sofa, not run, jump, lean forward more than...
- Page 5 CAUTION Stop using the Please do not use it on vehicles Do not use the carrier Check baby’s When using in the cuddling continuously for more than 2 other than train, bus and high-speed conditions regularly, carrier immediately if position, please watch your hour,or within 30 minutes after railway.
- Page 6 Name of all components Carrier ( the body ) Outer side Inner side Cuddle sheet Support buckle rubber band Sleeping Hood for storage buckle (female) Sleeping hood belt Support belt Sleeping Hood Sleeping hood buckle (male) Shoulder belt (left ang right) Support buckle Side belt Slide belt...
- Page 7 Preparations before putting on Adjust the length of the belt before putting on Belt length adjustment methods Please adjust all belt length before putting on. The position of the belt as Adjust the length of belt as shown below. ※ Here is an illustration to describe the side belt. shown in below.
- Page 8 When using as rear facing cuddling (Place the baby before putting on carrier) Put on ※ Place the baby before putting on carrier Fasten the hold buckle and carry baby after placing the baby onto the infant sheet. Fasten waist belt buckle By adjusting the waist belt, make Open the carrier widely at Fasten waist belt buckle until a...
- Page 9 Secure the support buckle Secure the hold buckle, and adjust the Click behind the neck length of the belt Hold buckle Click Hold belt WARNING WARNING Please secure the support Ensure hold buckle is buckle with caution when secured. Otherwise, baby Support buckle putting the baby on;...
- Page 10 When using as rear facing cuddling (Put on carrier before placing the baby) Put on ※ It is better to place the baby before putting on carrier. Put on the carrier first, carry the baby in the arm and secure the hold buckle. Fasten waist belt buckle By adjusting the waist belt, make Put the baby onto the...
- Page 11 Secure the hold buckle, and Support the baby by hand while Secure the support buckle putting on the shoulder belts behind the neck adjust the length of the belt Click Shoulder belt Hold buckle Click Hold belt Shoulder belt Support buckle To be continued WARNING...
- Page 12 When using as rear facing cuddling (Put on carrier before placing the baby) Adjust the length of left and Check the wearing status right side belts to fit user’s body Ensure the join carrier position are appropriate by checking the following check points in the mirror. Check point Is the hold buckle secured? Is the baby’s underarm,thing or back of...
- Page 13 How to release the rear facing cuddling Release method shown as below, please remove it at a safe place. ① Release the support buckle while supporting the baby. Release the hold buckle, and put down ② Release the left/right shoulder belts. the baby.
-
Page 14: How To Use For Back Carrying
How to use for back carrying Put on Seat baby into carrier Carry baby Fasten support buckle ① Place the child on the carrier, and pass the When standing up with a baby Adjust the length and height hold belt through the hold cover as shown carrier on back, securely hold the of support belt. - Page 15 Fasten the waist belt buckle Adjust the side belt to fit user’s body Fasten the waist belt buckle until Adjust side belts such that left and right belt ends are the same length. Please see a “click” sound is heard. [ Belt length adjustment methods ] ( page 6 ) for the adjustment of waist belt.
-
Page 16: Check The Status
Check the status Check the status How to release back carrying Ensure the carrier is correctly fitted by checking below Release support buckle, and waist pad. points in the mirror. Check point Unload baby from the back. ※ It is recommended to have another person assist the operation. - Page 17 How to use the sleeping hood When using face in cuddling, it can support the child's head in case of falling asleep. It can also be used as a wind- break or a sunshade. ※ Do not use the sleeping hood if infant sheet is being used ( Selling separately ). ※...
- Page 18 How to use the sleeping hood How to use the pocket The small items can be stored in the zip pocket. When not using the sleeping hood Store the hood at the upper part of pocket. Zipper Sleep hood Pocket WARNING Storing status Pocket...
- Page 19 Using for side carrying Support buckle Preparations before wearing ● Release the buckle of sleeping hood buckle, and store it in the pocket. (See Page 17 ) ※ When side carrying is being used, the sleeping hood cannot be used. ●...
- Page 20 Using for side carrying From the view of user, put the Cover the right shoulder with Hold the baby, place the baby left side belt through the right shoulder belt from the top of carrier and Please move the carrier to the left. shoulder belt loop and secure using the hold belt to support.
- Page 21 Check the wearing status Fasten the left shoulder Adjust the length of belt into the right side belt side belt the waist side buckle from the back around. Ensure the carrier is securely worn by checking the check points in the mirror. around the waist When fasten the shoulder buckle, please make sure...
- Page 22 Using for side carrying How to use the side carrying Please remove the side carrying by following steps at a safe place. Release the shoulder buckle Remove the shoulder belt Release the hold buckle, and which around the user’s waist. from shoulder lay down the baby Hold buckle...
- Page 23 Adjust the position of baby Explain the method of adjusting the baby positon after the baby has been carried. If the side, the thigh, the knee back of baby is pressed by the baby carrier. Adjust the height of the sitting position Pull the seat downward, please adjust the carrier sheet In addition, please adjust the height of the sitting and the gap between child.
- Page 24 Q&As In case of the burden of shoulder while having In case of the remainings of the side belt rear facing cuddling, back carrying and side being too long while having rear facing cuddling, back carrying and side carrying. carrying. ●...
-
Page 25: Maintenance
Maintenance Daily maintenance About checking and maintenance ● Press washing the carrier in cold or warm water, reshape the carrier, ● In case of the use, please confirm whether there is no frayed spot, a and dry flat in shade. cut or a scratch of the product, as well as no damage of the parts ●...
Need help?
Do you have a question about the Join and is the answer not in the manual?
Questions and answers