Dvd Settings And Adjustments; Audio Setup; Screen Setup - Sony RMT-V501F Service Manual

QQ
3 7 63 1515 0

DVD Settings and Adjustments

Audio Setup

"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode, then press V/v to select
then press ENTER.
Press V/v to select "Audio Setup," then press
2
ENTER.
Press V/v to select the setup item from the displayed list:
3
"Dolby Digital," "DTS" or "Audio DRC."
TE
L 13942296513
66
Audio Setup

Screen Setup

"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode, then press V/v to select
then press ENTER.
Press V/v to select "Screen Setup," then press
2
ENTER.
www
Press V/v to select the setup item from the displayed list:
3
"TV Type," or "Black Level."
To set the "Progressive" setting, see page 70.
.
68
Screen Setup
http://www.xiaoyu163.com
SET UP
V/v/B/b
ENTER
DVD SETUP
(DVD),
Language Setup
Audio Setup
Screen Setup
Parental Setup:
V v
ENTER RETURN SET UP
AUDIO SETUP
Dolby Digital
[ D-PCM ]
DTS [ Off ]
Audio DRC [ Standard ]
V v B b
RETURN SET UP
SET UP
V/v/B/b
ENTER
O RETURN
DVD SETUP
(DVD),
Language Setup
Audio Setup
Screen Setup
Parental Setup:
V v
ENTER RETURN SET UP
SCREEN SETUP
TV Type
[ 4:3 Letter Box ]
Black Level [ Off ]
Progressive [ Off ]
V v B b
RETURN SET UP
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Press B/b to select an item.
4
5
Press SET UP to exit the menu.
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On Select this when the player is connected to an audio component
with a built-in DTS decoder.
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to "D-PCM".
The default setting is indicated in bold print.
Standard Normally select this positon.
Wide Range Gives you the feeling of being at alive performance.
Notes
• If you select the surround setting while playing a DVD, the player does not output Dolby
Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you
set "Dolby Digital" to "D-PCM" in "AUDIO SETUP" menu).
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
• If you set "DTS" to "On," you cannot select surround setting (page 88).
• You cannot perform DTS audio output during playback quickly or slowly with sound (page 36).
Q Q
3 6 7 1 3
Press B/b to select an item.
4
5
Press SET UP to exit the menu.
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
4:3 Pan Scan Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
16:9 Select this when you connect a wide-screen TV or a TV with a wide
mode function.
4:3 Letter Box 4:3 Pan Scan
• Black Level
You can enhance the black level by increasing the brightness and contrast when
viewing DVD VIDEOs with the PROGRESSIVE indicator turned off.
The default setting is indicated in bold print.
Off Stops the increase of the contrast.
On Increases the contrast.
Notes
• Playback settings stored in the disc take priority over the "DVD SETUP" menu settings and
not all the functions described may work.
• Depending on the DVD VIDEO, "4:3 Letter Box" may be selected automatically instead of
"4:3 Pan Scan" or vice versa.
.
1-16
9 4 2 8
1 5 0 5 8 2 9 9 4
Audio Setup
16:9
m
co
continued
Screen Setup
9 9
2 8 9 9
67
69