Sony RMT-V501F Service Manual page 22

QQ
3 7 63 1515 0
To use the Auto Tape Speed function
When you are recording a program in the Auto mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to EP mode.
Note that some noise will appear on the picture when the tape speed is changed. If
you want to keep the tape speed, select SP. To operate this function, set "Tape
Length" in "VIDEO FUNCTION SETUP" menu correctly (page 106).
To watch another TV program after setting the timer
1 Press TV/VIDEO to display "TV" in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV's antenna input; if not, skip this step.
3
Select another channel on the TV.
To watch a DVD after setting the timer
1
Press SELECT DVD to control the DVD player.
Press Z and place the disc on the disc tray.
2
Press H PLAY.
3
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
Tips
• If the indicator appears, the timer settings overlap. To check, change or cancel the timer
setting, see "Checking/changing/canceling timer settings" on page 59.
• If the indicator appears, this means that the VCR is currently recording this program.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 44).
– Display tape information on the TV screen (page 46).
Note
• The indicator flashes in the display window when you complete the timer setting with no
tape inserted.
TE
L 13942296513
50
Recording TV programs using the timer
3
Press DIAL TIMER to set the start time.
"START" and the next quarter hour increment appear alternately in the
display window.
4
Turn DIAL TIMER to set the recording start time.
You can set the recording start time in 15 minute intervals or adjust the time
in one minute intervals by pressing the CHANNEL +/– buttons on the unit.
5
Press DIAL TIMER to set the stop time.
"STOP" and the next quarter hour increment appear alternately in the
display window.
www
.
52
Recording TV programs using the Dial Timer (SLV-D560P only)
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Recording TV programs using the Dial
Timer SLV-D560P
(
The Dial Timer function allows you to make
timer recordings of programs without turning
on your TV. Set the recording timer to record
up to eight programs that will be broadcast
within a month using the DIAL TIMER. The
recording start time and recording stop time
can be set at one minute intervals.
Before you start...
• Turn on the DVD-VCR.
• When using a cable box, turn it on.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
1 Press DIAL TIMER.
DATE indicator appears and the current date flashes in the display window.
If the date and time are not set, MONTH indicator will appear.
To set the date and time, see "To set the clock" on page 54.
2
Turn DIAL TIMER to set the recording date.
Q Q
3 6 7 1 3
Recording TV programs using the Dial Timer (SLV-D560P only)
6
Turn DIAL TIMER to set the recording stop time.
You can set the recording stop time in 15 minute intervals or adjust the time
in one minute intervals by pressing the CHANNEL +/– buttons on the unit.
7
Press DIAL TIMER.
Current channel flashes in the display window.
8 Turn DIAL TIMER to set the channel number.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
turn DIAL TIMER or press INPUT SELECT to display "L1" or "L2."
9
Press DIAL TIMER.
Current tape speed flashes in the display window.
10
Turn DIAL TIMER to set the tape speed.
11
Press DIAL TIMER to complete the setting.
"OK" appears in the display window for about five seconds.
.
The timer indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
Recording TV programs using the Dial Timer (SLV-D560P only)
1-12
9 4 2 8
only)
?/1 POWER
CHANNEL +/–
DIAL TIMER X
continued
1 5 0 5 8 2 9 9 4
m
co
continued
9 9
2 8 9 9
51
53