Table of Contents
Advertisement
IP Network Services
The IP Network Service defines the properties of the IP network used for
connecting IP endpoints to the conference and the IP cards (installed in the
MCU) to which the network is connected. Several of the network components
are used by both H.323 and SIP endpoints to connect to the conference, and
the same IP card is used for H.323 and SIP connections. Therefore one IP
Network Service can be defined for both H.323 and SIP environments as
well. However, you can define the Network Service to be H.323-only to be
used to connect only H.323 endpoints or SIP-only to connect only SIP
endpoints.
To define an IP Network Service:
1.
In the Browser pane, expand the MCU tree.
2.
Expand the MCU Configuration tree.
3.
Expand the Network Services tree.
4.
Right-click the Network Services – IP icon, and then click New IP
Service.
Chapter 3 - Initial System Configuration
3-23
Advertisement
Table of Contents
