Messages - Sony MEX-GS820BT Operating Instructions Manual

Bluetooth
Hide thumbs Also See for MEX-GS820BT:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Cannot pair.
 The unit may not be able to pair with a
previously paired BLUETOOTH device after
initializing the unit if the pairing
information of the unit is on the
BLUETOOTH device. In this case, delete
the pairing information of the unit from
the BLUETOOTH device, and then pair
them again.
BLUETOOTH function cannot operate.
 Turn off the unit by pressing OFF for more
than 2 seconds, then turn the unit on
again.
No sound is output from the car speakers
during handsfree call.
 If the sound is output from the cellular
phone, set the cellular phone to output
the sound from the car speakers.
Siri Eyes Free is not activated.
 Perform the handsfree registration for an
iPhone that supports Siri Eyes Free.
 Set the Siri function on the iPhone to on.
 Cancel the BLUETOOTH connection with
the iPhone and the unit, and reconnect.
Sony | Music Center operation
Application name is mismatched with the
actual application in "Sony | Music
Center".
 Launch the application again from the
"Sony | Music Center" application.
While running the "Sony | Music Center"
application via BLUETOOTH, the display
automatically switches to [BT AUDIO].
 The "Sony | Music Center" application or
BLUETOOTH function has failed.
 Run the application again.
The "Sony | Music Center" application is
automatically disconnected when the
display switches to [IPD].
 The "Sony | Music Center" application on
iPhone/iPod does not support iPod
playback.
– Change the source of the unit to other
than [IPD], then establish the "Sony |
Music Center" connection (page 17).
32
GB
The "Sony | Music Center" connection is
automatically disconnected when the USB
mode of the unit is changed to
[ANDROID].
 The Android smartphone is not
supporting playback in Android mode.
– Set the USB mode of the unit to [MSC/
MTP], then establish the "Sony | Music
Center" connection (page 17).

Messages

The following messages may appear or flash
during operation.
INVALID
 The selected operation could be invalid.
 [USB MODE] cannot be changed during
iPod playback.
OUTPUT ERROR: There may be an internal
malfunction.
 Check the connection. If the error
message still remains on in the display,
consult your nearest Sony dealer.
READ: Now reading information.
 Wait until reading is complete and
playback starts automatically. This may
take some time depending on the file
organization.
TEMP CAUTION: The thermal protector is
activated.
 Reduce the volume.
(underscore): The character cannot be
displayed.
For CD playback:
CD ERROR: The disc cannot be played. The
disc will be ejected automatically.
 Clean or insert the disc correctly, or make
sure the disc is not blank or defective.
CD NO DISC: There is no disc.
 Insert a disc containing playable files
(page 26).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents