Assembly Instruction - Sears FREE SPIRIT Owner's Manual

This manual is designed to help you easily assemble, adjust and use this machine. Please
read this manual carefully. For the sake of familiarizing yourself with the parts identified in
the instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts
list for help to identify the parts.
It will take two people to assemble this unit.
STEP 1. ATTACHING THE STABILIZERS
n
Attach the front stabilizer (83) with transportation wheels (66) to the front frame (70)
using two carriage bolts M8*75mm (4), two curve washers M8 (7), two spring washers
M8 (6) and two cap nuts M8 (5).
n
Attach the rear stabilizer (82) with adjustable end caps (2) to the rear frame (15) using
two carriage bolts M8*75mm (4), two curve washers M8 (7), two spring washers M8 (6)
and two cap nuts M8 (5).
Adjusting the length of your bike:
Remove the seat adjustment knob (36). Slide the rear frame (15) into the front frame
(70) to your desired location and secure with the adjustment knob (36).
NOTE: Ensure the bolts are fastened securely to avoid injuries.
If the unit is wobbly use the leveling caps on the rear stabilizer to level the unit.
PDF created with pdfFactory trial version

ASSEMBLY INSTRUCTION

5
www.softwarelabs.com
©2009